Artikel

The completed Boutique Dress Hanger wall hanging displayed as a finished panel with four embroidered blocks, borders, and hanging loops.
A wide shot of the Janome Continental M17 with the embroidery unit attached and both screens powered on, ready for sewing and embroidery.
A BX font file is being dragged from a desktop folder and dropped onto the Embrilliance workspace to install it.
A wide view into the Brother PR680W embroidery area showing the needle array and hoop arms before the bobbin tension adjustment.
A ZSK Sprint 6 stitches a neon green tote bag held in a magnetic hoop, showing a clean, stable setup mid-run.
Hands snap a magnetic hoop onto a jacket sleeve on a hooping station, capturing the exact moment the fabric is clamped flat and ready for production.
A fully hooped piece of dark denim sits perfectly flat in a 180mm x 130mm magnetic frame with all six magnets seated evenly around the perimeter.
A close-up of a multi-needle embroidery machine stitching a small logo onto a visor bill at speed.
A close-up shows the excess silver Glitter Flake tearing away cleanly from the stitched circle on a black knit beanie.
A close-up of the Dahao-style embroidery machine screen highlighting the A-with-gear Advanced Settings icon used to correct built-in font sizing.
An extreme close-up of the Brother VR’s automatic needle threading mechanism lowered around the needle under the LED light.
A close-up overhead view of the Brother Luminaire stitching the placement box on a hooped quilt sandwich.