Sewtalent
Tear Away Embroidery Machine Stabilizer 10"x50yd/ 12"x50yd roll, 1.8 oz Roll package Washable Fabric Backing for Machine & Hand Sewing, Ideal for Fabric
Tear Away Embroidery Stabilizer – 1.8 oz Medium Weight, 10"×50 yd / 12"×50 yd Roll
Get clean, professional embroidery on woven fabrics with this tear-away embroidery stabilizer. The 1.8 oz/yd² medium-weight, washable fabric backing supports stitches, helps prevent puckering, and tears away neatly after sewing. Sized for most home and commercial hoops, the roll cuts cleanly to fit 4×4, 5×7, 6×10 and larger frames—ideal for machine embroidery and hand sewing projects.
Why choose this tear-away roll
- Crisp, stable stitches – Reduces pull, tunneling, and distortion on cotton, linen, denim, canvas, twill, caps, and bags.
- Clean tear-off – Tears close to the satin stitch without stretching the fabric or leaving bulky edges.
- Production-friendly – Large value rolls 10"×50 yd (≈25.4 cm × 45.7 m) or 12"×50 yd (≈30.5 cm × 45.7 m) minimize changeovers and waste.
- Needle-friendly – Low lint, consistent non-woven backing runs smoothly with common needle sizes (75/11–90/14).
- Wide compatibility – Works with Brother, Janome, Singer, Baby Lock, Bernina, Juki, Husqvarna Viking, and more.
- Washable durability – Softens in the first wash; any tiny fuzz left in dense areas becomes unnoticeable.
How to use
- Cut a piece slightly larger than the hoop. Hoop the fabric with one layer of stabilizer (use two layers for very dense designs or heavier fabrics).
- Embroider as normal. Support the stitch area with one hand and tear away the excess stabilizer in the direction of the stitches.
- Trim loose fibers if needed. Launder as usual; remaining micro-bits will soften after the first wash.
Tip: Embroidering on plush or textured surfaces (towels, fleece)? Add a water-soluble topping film on top (sold separately) to prevent stitch sink-in.
Specs
| Type | Tear-away embroidery stabilizer (non-woven, washable backing) |
| Weight | 1.8 oz/yd² (medium weight) |
| Size options | 10" × 50 yd (≈25.4 cm × 45.7 m) / 12" × 50 yd (≈30.5 cm × 45.7 m) |
| Color | White |
| Form | Roll |
| Best for | Woven fabrics: cotton, linen, denim, canvas, twill; caps, totes, patches, appliqué, monograms |
| Not ideal for | Very stretchy knits—use cut-away backing instead |
| In the box | 1 roll of tear-away embroidery stabilizer (size as selected) |
Good to know
- This is a tear-away backing (under the fabric). It is not water-soluble.
- Use two layers cross-grained for high-stitch-count designs or thinner fabrics.
- Pre-test on a scrap to confirm hooping, tension, density, and colorfastness.
Typical use cases
Logos and monograms on shirts and caps, appliqué, satin-stitch lettering, patches, tote bags, denim jackets, workwear, quilting motifs on woven fabrics.
FAQs
Is this tear-away the same as water-soluble topping?
When should I use two layers?
Will it fit my hoop size and machine?
Tear Away Embroidery Machine Stabilizer 10"x50yd/ 12"x50yd roll, 1.8 oz Roll package Washable Fabric Backing for Machine & Hand Sewing, Ideal for Fabric
En stock - Prêt à être expédié
Estimated delivery between Septembre 17 and Septembre 21. Order within .
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Tear Away Embroidery Stabilizer – 1.8 oz Medium Weight, 10"×50 yd / 12"×50 yd Roll
Get clean, professional embroidery on woven fabrics with this tear-away embroidery stabilizer. The 1.8 oz/yd² medium-weight, washable fabric backing supports stitches, helps prevent puckering, and tears away neatly after sewing. Sized for most home and commercial hoops, the roll cuts cleanly to fit 4×4, 5×7, 6×10 and larger frames—ideal for machine embroidery and hand sewing projects.
Why choose this tear-away roll
- Crisp, stable stitches – Reduces pull, tunneling, and distortion on cotton, linen, denim, canvas, twill, caps, and bags.
- Clean tear-off – Tears close to the satin stitch without stretching the fabric or leaving bulky edges.
- Production-friendly – Large value rolls 10"×50 yd (≈25.4 cm × 45.7 m) or 12"×50 yd (≈30.5 cm × 45.7 m) minimize changeovers and waste.
- Needle-friendly – Low lint, consistent non-woven backing runs smoothly with common needle sizes (75/11–90/14).
- Wide compatibility – Works with Brother, Janome, Singer, Baby Lock, Bernina, Juki, Husqvarna Viking, and more.
- Washable durability – Softens in the first wash; any tiny fuzz left in dense areas becomes unnoticeable.
How to use
- Cut a piece slightly larger than the hoop. Hoop the fabric with one layer of stabilizer (use two layers for very dense designs or heavier fabrics).
- Embroider as normal. Support the stitch area with one hand and tear away the excess stabilizer in the direction of the stitches.
- Trim loose fibers if needed. Launder as usual; remaining micro-bits will soften after the first wash.
Tip: Embroidering on plush or textured surfaces (towels, fleece)? Add a water-soluble topping film on top (sold separately) to prevent stitch sink-in.
Specs
| Type | Tear-away embroidery stabilizer (non-woven, washable backing) |
| Weight | 1.8 oz/yd² (medium weight) |
| Size options | 10" × 50 yd (≈25.4 cm × 45.7 m) / 12" × 50 yd (≈30.5 cm × 45.7 m) |
| Color | White |
| Form | Roll |
| Best for | Woven fabrics: cotton, linen, denim, canvas, twill; caps, totes, patches, appliqué, monograms |
| Not ideal for | Very stretchy knits—use cut-away backing instead |
| In the box | 1 roll of tear-away embroidery stabilizer (size as selected) |
Good to know
- This is a tear-away backing (under the fabric). It is not water-soluble.
- Use two layers cross-grained for high-stitch-count designs or thinner fabrics.
- Pre-test on a scrap to confirm hooping, tension, density, and colorfastness.
Typical use cases
Logos and monograms on shirts and caps, appliqué, satin-stitch lettering, patches, tote bags, denim jackets, workwear, quilting motifs on woven fabrics.